Why is my Wi-Fi on but not working on my phone?
If your Android phone won’t connect to Wi-Fi, you should first make sure that your phone isn’t on Airplane Mode, and that Wi-Fi is enabled on your phone. If your Android phone claims it’s connected to Wi-Fi but nothing will load, you can try forgetting the Wi-Fi network and then connecting to it again.
Why isn’t my Wi-Fi working on my iPhone?
Still can’t connect? Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.
Why is my Wi-Fi not working on my iPhone but working on other devices?
First, an iPhone may not be connecting to WiFi due to a minor firmware issue. … If this problem is caused by a minor firmware glitch, then your iPhone should be able to connect to the WiFi after this. Second, you must power-cycle your network devices such as your modem or router.
What can cause WiFi to stop working?
There are a lot of possible reasons for why your internet isn’t working. Your router or modem may be out of date, your DNS cache or IP address may be experiencing a glitch, or your internet service provider could be experiencing outages in your area. The problem could be as simple as a faulty Ethernet cable.
Why can’t I connect to my WiFi even though the password is correct?
Make sure you select the correct wireless security option when asked for your password (for example, select WEP 40/128-bit Key if you’re typing the 40-character pass key for a WEP-encrypted connection). … Try turning the card off and then on again to reset it — see Wireless network troubleshooter for more information.
Why is iPhone dropping Wi-Fi?
If there’s a software problem with your iPhone’s Wi-Fi settings, resetting network settings will usually fix it. Go to Settings -> General -> Transfer or Reset iPhone -> Reset -> Reset Network Settings. Then, tap Reset Network Settings again to confirm.
Why is my Wi-Fi only connecting to devices?
This normally happens because your ISP only gives one IP address and locks to the first device connected. So, your computer works, but your router won’t. This procedure will make the router the first device connected and should resolve your issue.