What are some general OSHA guidelines to use when using power electric tools or other hand tools in the workplace?
Secure work with clamps or a vise, freeing both hands to operate the tool. Avoid accidental starting. Do not hold f ingers on the switch button while carrying a plugged-in tool. Maintain tools with care; keep them sharp and clean for best performance.
When working with hand and power tools you should always?
Keep floors dry and clean to avoid slipping while working with or around dangerous tools. Keep cords from presenting a tripping hazard. Never carry a power tool by its cord. Use tools that are double-insulated or have a three-pronged cord and are plugged into a grounded receptacle.
What is the proper safety guard power tools?
The muzzle end of the tool must have a protective shield or guard centered perpendicularly on the barrel to confine any flying fragments or particles that might otherwise create a hazard when the tool is fired. The tool must be designed so that it will not fire unless it has this kind of safety device.
When working with hand and power tools you must use personal protective equipment if you will be exposed to?
ANNISTON ARMY DEPOT, Ala. — Employees who use hand and power tools are exposed to the hazards of falling, flying, abrasive and splashing objects. They also may be subject to harmful dusts, fumes, mists, vapors or gases.
Which of the following basic safety rules should not be followed when using hand tools?
Never carry a tool by the cord or hose. Never yank the cord or hose to disconnect it from the receptacle. Keep cords and hoses away from heat, oil and sharp edges. Disconnect tools when not using them, before servicing and cleaning them, and when changing accessories such as blades, bits and cutters.
How do you maintain hand held power tools?
Keep your power tools protected from dust, moisture and other adverse conditions by storing them properly after use. Keep them in their original cases if possible, or tuck them away in storage drawers or tool chests, preferably in a garage or basement with a moderately controlled climate.
What are the dos and don’ts in using hand tools pliers?
Avoiding abuse/misuse:
- Never expose these pliers to excessive heat.
- Don’t bend stiff wire with the tip of the pliers.
- Never rock the pliers side to side when cutting.
- Never pry with the nose of the pliers.
- Never attempt to cut a “HOT” wire.
Why do we need to use appropriate hand tools?
Using the correct tool for the job is the first step in safe hand tool use. Tools are designed for specific needs. … To avoid personal injury and tool damage, select the proper tool to do the job well and safely. Quality professional hand tools will last many years if they are taken care of and treated with respect.
Should you wear gloves when using power tools?
Use appropriate safety equipment, such as goggles, earplugs and dust masks. Do not wear gloves when working with most tools. Always wear eye protection when working with metal.
What should you not do with hand tools?
Don’t use faulty tools such as cracked, chipped, or broken handles on files, hammers, screwdrivers, or sledges. Don’t use wrenches, pipe tools, and pliers with worn jaws. Don’t apply excessive pressure or force to hand tools. Never use a hammer without a good grip.
What are the safety precautions you must consider while using wire cutter?
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) whenever there is a potential hazard from flying particles, pieces of wire, etc. Cut at right angles. Never rock the cutting tool from side to side or bend wire back and forth against the cutting edges.
How can we use hand tools safely and effectively on a construction site?
Keep accessories and tool bits in good condition, cutting tools should be sharp and clean.
- Use the right accessories for the tool, material and environment.
- Plugs and cables are vulnerable to damage.
- PPE protects the user from remaining risks.
What is your idea of hand tool?
A hand tool is any tool that is powered by hand rather than a motor. Categories of hand tools include wrenches, pliers, cutters, files, striking tools, struck or hammered tools, screwdrivers, vises, clamps, snips, saws, drills, and knives. … Portable power tools are not hand tools.
How do you handle cutting tools?
Precaution for using cutting tools
- Please use safety items, such as safety glasses and protective gloves.
- Use appropriate devices to remove chips. Never use your hands.