What transmission is in a 1997 Chevy K1500 4X4?
4L60E
4L60E 4×4 Z71 1995 1996 1997 Stock Remanufactured Transmission Chevy, GM, GMC.
What transmission does a 5.7 Vortec have?
The 5.7-liter Vortec V-8 engine, paired with a four-speed automatic transmission, is rated at 255 horsepower at 4,600 rpm and 330 foot-pounds of torque at 2,800 rpm. The truck has a payload of 1,656 pounds and a curb weight of 4,544 pounds.
What year Silverado has the 4L60E transmission?
The key distinction of the Later 4L60-E (1996-2010) from the Early 4L60-E (1992-1997), 4L60 (1990-1992), or 700R4 (1982-1989) is the six-bolt “hex” rear output or tailhousing / adapter pattern. The previous versions featured a four-bolt square bolt pattern at the adapter or tailhousing.
How can I tell if I have a 4L60 or 4L60E?
The rear output housing is configured with a six-bolt pattern in late model 4L60E transmissions. The 4L60 transmission is configured with a four-bolt pattern. The bolt pattern is not a guaranteed distinction, however, as early 4L60E transmissions, manufactured from 1992 through 1997, also have a four-bolt pattern.
What transmission can replace a 4L60E?
The owner of this rig could’ve kept paying to have the 4L60E rebuilt, but instead chose to replace it with the much beefier 4L80E four-speed automatic transmission. The 4L80E has been used in a number of 1/2-, 3/4-, and 1-ton GM trucks over the years.
Will a v6 4L60E transmission fit a v8 Chevy?
Registered. The 4L60E in the NNBS is identical except the harness in 2009-2013. 2007.5-2008 are the exact same regardless if is v6 or v8. The converter or flexplate may be different tho.
How do I tell what year my 4L60E is?
Will a 350 bolt up to a 4L60E?
The 4L60E will bolt straight up to your 350. :yes: You will need some way to control the tranny though. The OD is electronically controlled, hence the “E” at the end of the 4L60.
Will a 98 4L60E fit a 96?
The only difference we have found in the two is that 98 has a full bell housing and the 96 has a half bell housing. And also the 96 has 4 bolts to the transmission and the 98 has six to the transmission but we do have a adapter.
What does 4L60E stand for?
The 4L60E Transmission is a series of automatic transmission from General Motors. Previously named the THM700, and later renamed to 4L60 to fit into GM’s new naming convention. The “E” stands for the electronically shift controlled version of the 4L60 automatic transmission.
How can you tell the difference between a 4L60E and a 4L80E?
Appearance. The 4L80E can be told apart from the 4L60E by looking at their transmission fluid pan. This is because the 4L80E has a pan that is oval in shape whereas a rectangular pan is featured by the 4L60E. Another disparity between both devices is the number of bolts used to secure the transmission to the engine.
What kind of transmission do I have?
Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.
What is the difference in 4L60E transmissions?
The two transmissions cannot be differentiated from the outside. The 4L65E shares the same exterior parts but have stronger internals such as 5 pinion planets compared to 4 in the 4L60E. 4L60E uses a 6.5″ depth bell with 6 bolts for non gen 3 LS applications and a 7″ depth bell with 7 bolts for LS applications.
Are all 4L60E valve bodies the same?
There were updates made to it over the years, so not every 4L60 valve body is the same. Some of the differences include the number of solenoids, as well as the type of 4L60E TCC solenoid and 4L60E 3-2 control solenoid.
How do I know what Chevy transmission I have?
Locate the “source serial number” that is stamped on the transmission. The source serial number location is typically found on the driver’s side of the transmission on most Chevy vehicles.
Does the VIN tell you the transmission?
For many makes, the VIN is always enough information to determine transmission.
What transmission do I have by VIN number?
Simply write the VIN number down and you can then ask a dealership service department, auto repair shop, or auto parts retailer to help you identify the transmission. They’ll easily be able to find the specs by plugging the VIN number into the computer.