What should I put in my hot tub when I first fill it up?
What chemicals do you put in a new hot tub?
What Chemicals Do I Need for a Spa or Hot Tub?
- Spa Sanitizer – Usually Bromine or Chlorine.
- pH Increaser and Decreaser.
- Total Alkalinity Increaser.
- Calcium Hardness Increaser.
- Spa Shock – Either Chlorine or MPS.
Should I shock my hot tub when I first fill it up?
Shock (Optional)
Circulate the hot tub for at least 30 minutes. Do not put the hot tub cover on, as shock needs to oxidize or time to release gases. Do not turn on the jets while shocking, as the product will oxidize too fast.
When can I add chemicals to my hot tub after filling?
Now that your filters are clean and installed, your water is fresh, and your pump is primed, it’s finally time to add your start-up chemicals. Wait until your hot tub water reaches 80ºF (30ºC) before you add anything. The heat helps the chemicals dissolve and incorporate into the water.
How soon can you use hot tub after adding chemicals?
Do not use a hot tub right after you add chemicals. You should wait at least 2 hours before using the hot tub again. The chemicals need time to work their magic and sanitize the water. Also, a higher concentration of chlorine is best because you’ll need to add chemicals less often.
How do you do spa chemicals?
How to apply hot tub chemicals: a step by step guide.
- Remove the Hot Tub Cover. It is crucial that the cover is left open while applying chemicals. …
- Turn on the Hot Tub, but Turn Off any Air Jets. Switch on your spa when applying. …
- Use Test Strips. …
- Pre-Measure Chemicals Safely. …
- Apply Chemicals.
Can you mix chlorine and bromine in a spa?
Safety: Mixing Chlorine and Bromine in A Spa
DO NOT mix chlorine and bromine together in either a dry state or within the water as this can cause a dangerous reaction. If you are considering switching from one sanitiser to another you should always clean and drain your hot tub including a line flush.
How much chlorine do I put in my new hot tub?
How Much Chlorine Should I Add to my hot tub? A chlorine level of between 3-5mg/l must be maintained in your hot tub at all times. The addition of chlorine will depend upon usage and bathing habits. It could be daily or every 2-3 days (for 1mg/l add 2g per 1000 litres).
How much chlorine do I put in my first lazy spa?
To shock your portable hot tub with chlorine granules: Fill a bucket with water from your inflatable hot tub. Dissolve 1 oz of granules for each 500 gallons of water your hot tub holds in the bucket (that’s about 1 tablespoon of granules) NEVER add water to chemicals – always add your chemicals to water!
What is better for a spa bromine or chlorine?
While chlorine may work more quickly, bromine is more stable than chlorine, especially in warm water. … Bromine: Kills bacteria in your spa for a longer period of time than chlorine. The exception to this rule is ultraviolet (UV) light, which destroys bromine more quickly than chlorine.
Should I use chlorine or bromine?
Bromine works better at higher temperatures than chlorine. Above 75°F, bromine remains stable, whereas chlorine is more effective in temperatures as low as 65°F. This makes bromine a better choice for hot tubs and spas, and an unheated pool will be better served by the use of chlorine.
Do you need to shock a bromine spa?
If you are sanitizing your spa with bromine, you should shock your spa with Spa Selections Non-Chlorine Shock Oxidizer on a regular basis to oxidize the waste out of the water and reduce foaming. Spa Selections Bromine is a two-part system, including Spa Selections Brominating Tablets and Spa Selections Brom-Start.
Why is bromine banned Canada?
However, the tides have turned. In its most recent reevaluation (all pesticides in Canada are regularly reevaluated for safety), the government deemed the risk to human health from the misuse of sodium bromide by consumers too dangerous to continue to have it available to individual Canadians.
Can I switch from chlorine to bromine in hot tub?
For spas and hot tubs you can use either, but bromine is king in hot water. … Those with very sensitive skin or nose may prefer bromine. If you switch from chlorine tablets to bromine tablets and, you will need to purchase a new brominator because mixing chlorine and bromine can cause a dangerous chemical reaction.
Should I use a floating chlorine dispenser in hot tub?
A floater is really the worst way to take care of sanitizing your tub—about the most “dinosaur” method still used. … It’s difficult to regulate the amount of sanitizer being dissolved into the body of water.
Is bromine better for hot tub?
If you have a spa, bromine has a lot of advantages over using chlorine. It may cost a little bit more, but it lasts longer and does a much better job than chlorine at killing bacteria, especially at high temperatures and high pH levels.
Is salt or chlorine better for hot tubs?
Chlorine is preferable over other treatment options for a variety of reasons: It is more affordable and cost effective. Chlorine hot tubs require less upkeep and last longer than salt water hot tubs. Chlorine achieves the cleanliness and oxidation levels that other chemicals and methods do not.
What’s a bromine pool?
Pool bromine is a sanitizer, oxidizer, and algicide that is used in swimming pools and spas. In its original state, bromine is a reddish brown liquid, but for pools, it can be found in tablet, granular, stick, and liquid sanitation products (though you would never use pure elemental bromine in a pool or spa).