How do I factory reset my Synology NAS?
Start by locating the reset button on the back of your NAS drive. It’s usually right next to the USB and Ethernet port(s). Next, get a paper clip or a SIM card removal tool and hold down the reset button for about five seconds—until you hear a beep. Then let go immediately.
How do I soft reset Synology?
Soft reset your Synology Router
Use a paper clip to gently press and hold the RESET button for 4 seconds. Your Synology Router will then start a soft reset.
How do I reboot my NAS?
How do I force reboot my Synology?
If you want to shutdown or restart your Synology NAS via the web-based interface, you’ll need to log in and look to the icons in the upper right corner. Click the options menu, indicated by the little head and shoulders bust icon. From there you can select either “Restart” or “Shutdown” to perform the desired task.
Can’t connect to Synology NAS?
Ensure the Synology NAS and your computer are connected to the same LAN. Remove or disable the firewall, especially Windows’ built-in firewall, or antivirus software on your computer temporarily. Use an Ethernet cable to directly connect your computer and the Synology NAS without going through any network device.
What is the default IP address for Synology NAS?
Most Synology routers have a default IP address of 192.168. 1.1.
How do I connect my Synology NAS to my network?
How to connect to your new Synology Network Attached Storage: Turn on the NAS.
- Head to the Synology website.
- Choose your NAS model.
- Download Synology Assistant.
- Install the software.
- Run Synology Assistant.
- Allow the suite to search your network.
- Right-click your NAS and choose Connect.
How do I connect my Synology NAS to my wireless router?
You can connect Synology NAS device to a wireless network when a wireless dongle is plugged into its USB port. Go to Control Panel > Wireless > Network Map Configuration and choose Join Wireless Network.
Can I connect Synology NAS directly to PC?
If you are planning to connect your Synology NAS to your PC over USB, then no, you can not. NAS means network attached storage and is being connected to a network. Once added as a network drive, the new drive will appear in your drive list on your PC or Mac. If you want to connect your NAS directly, you can do it.
How do I find my Synology NAS IP address?
What is the default password for Synology NAS?
Double-click on your Synology device. Enter the system’s default username, admin, and leave the password field blank.
How do I access my Synology NAS on a Mac?
Overview
- Open Finder on your Mac computer.
- Find the menu bar along the top of the screen.
- Click Go and select Connect to Server.
- Enter your DSM username and password.
- Finally, if your user name credentials are correct, you will now see your Synology NAS listed under the Shared section of your Finder window.
How do I find the IP address of my NAS Mac?
Whether your connection is wireless or wired, you can also find this information by opening the Apple menu, and then heading to System Preferences > Network. Select your network connection, and then click “Advanced.” You’ll find IP address information on the “TCP/IP” tab and the MAC address on the “Hardware” tab.
How do I access files from Synology NAS in my local network?
File sharing: How to access files on Synology NAS within the local network (NFS)?
Please follow the steps below.
- Log into DSM with an account belonging to the administrators group.
- Go to Control Panel > File Services.
- On the Win/Mac/NFS tab, tick the box Enable NFS.
- Click Apply to save settings.
How do I find my Synology NAS server name?
From Control Panel, select Network. Then from within Network you will see the field Server Name. Changing this field will change your Synology’s Hostname and Server name.
How do I connect my Synology NAS to Windows 10?
How do I read a NAS file in Windows?
Reading NAS data on Windows
- Pull the disks out of the NAS.
- Connect the disks to the Windows PC directly using SATA cables.
- Download, install, and launch ReclaiMe File Recovery.
- Select your NAS volume and click Start.
- Wait till the software completes the analysis and copy the recovered NAS data to prepared storage.