How do I reset my weight scale?
How do I reset my calibration scale?
Calibrating Your Scale
Power on the scale and allow it to warm up (usually 30 seconds) Begin the calibration mode sequence. Follow the instructions on the scale’s display. Once the calibration process has been completed, remove the calibration weight and return to normal weighing modes.
How do you fix a weight scale error?
This can be done by following these steps:
- Turn on the digital scale.
- Press on the calibration button. This button differs from one digital scale to another.
- Place an object on top of the platform and let the scale weigh it out.
- Wait for the final reading to show.
- Turn off the digital scale.
Why is my digital scale not working?
Battery problems are often the cause behind digital scale display and function issues. Use a small, clean paintbrush or cotton swab to sweep the compartment free of dust or debris that might interfere with the battery connection. If that doesn’t solve the problem, try replacing the batteries with fresh ones.
Why does my weight scale keep saying error?
Batt error message
A “Batt” message appears when your scale is low on batteries. Remove old batteries from the back of the scale. Insert 4 new AA batteries. The scale manufacturer recommends using Duracell batteries.
How do you reset an electronic bathroom scale?
Three Things to Know About Digital Bathroom Scales
- Place the scale back on a hard, flat surface (see #2 below for optimal flooring surfaces).
- With one foot, press the platform of the scale so that numbers appear on the display. Once you see zeros or dashes remove your foot.
- Wait for the scale to turn off again.
- Your scale is now calibrated.
Why does my digital scale say 0 LD?
The weight capacity is exceeded.
How do I reset my Befour scale?
Hold the ON button down and press ZERO button. Release both buttons. “Set-0” will be displayed and the “0” will be flashing. Depress the POUNDS button repeatedly until “Set-6” appears.