How do you change the time on an armitron pro sport watch?
Examine the watch face and locate the buttons labeled “Mode,” “Adjust” and “Alarm.” Press the “Mode” button repeatedly until the time display appears on the watch. Hold the “Mode” button until you see the alarm display appear, then release the button. Hold the “Mode” button a second time to enter the time–setting mode.
How do you set an armitron all sport watch?
Press and hold the “set” button, “A,” to set the time and date on your watch. This will cause the numbers on the face of the watch to flash. Press the “C” button to zero the number of seconds. Press “B” to advance the settings to hours and minutes.
How do I set a 4 button armitron watch?
How do I set the time on my armitron wr165ft watch?
To set the time on the Armitron WR165, first press the top left button “A”, then press the top right button “C” to reset the seconds. Press the bottom left button “B,” then press “C” to set the correct hour. Press “B” and “C” again to set minutes and date.
How do I set my armitron watch to 12 hour time?
Press the top left button on your watch once. The seconds should begin flashing. Press the lower left button six times until the 12/24-hour format appears. Press the top right button once to select the 12–hour time format.
How do I reset my armitron watch battery?
How do you set a women’s armitron pro sport watch?
How do I set my armitron 24 hour clock?
From Time Telling Mode, press ‘D’. Press ‘B’ six times to enter the 12/24 Hour (Military Time) Mode. Press ‘C’ to select either 12 Hour or 24 Hours (Military) Time. Press ‘D’ to end set sequence and return to Time Telling Mode.
| T2 | 00 |
| 2:45 | |
What is T2 on armitron watch?
When the alarm is engaged, the alarm mark appears on the Alarm time display and also on the Time/ Calendar (T1) or the Dual Time (T2) display that the alarm is set. In order to engage or disengage the alarm, press button D in the Alarm Mode.
How do I change my watch from military time to regular time?
How do I reset my armitron wr330ft watch?
Press the button on the top left-hand side of the watch until the seconds flash, then press the button on the button on the top right-hand side of the watch to turn the seconds to zero. Press the button on the bottom left-hand side of the watch until the hours blink.
How do you change the date on a 4 button digital watch?
To set the time and date you would press both buttons at the same time and hold them down for 5–10 seconds. Part of the time display would then start flashing, indicating that you’re now in time –setting mode, and can release the buttons.
How do you set a digital watch with one button?
One–button LED watches are super useful and simple to use. Press the button once to display the time, and then press and hold the button for 3 seconds to select the right hour and minutes. You can even set the date by doing the same thing.