How do you unscrew a bathtub drain?
How do you remove a stuck bathtub drain stopper?
How to Remove a Stuck Drain Stopper
- Remove the clip that holds the overflow cover plate to the plunger rod.
- Try spraying some liquid wrench or WD-40 down the overflow drain pipe where to plunger sits.
- Use pliers to grip the rod and attempt to lift straight up.
How do you remove a bathtub drain without the tool?
What tool do you use to remove a tub drain?
Pliers: Short of a plug wrench, the best substitute is a set of needle-nose locking pliers. The pliers need to be small enough to reach into the drain and through the cross. Once the locking pliers are secured, you use a pair of standard pliers to turn the locking-pliers and loosen the drain.
How do you fix a stuck bathtub drain?
Why won’t my bathtub drain stay open?
When the tub isn’t draining properly, it’s because the linkage is too long. To shorten it, you need to take it out of the tub. Remove the overflow cover from the front of the tub by unscrewing the screws holding it in place with a screwdriver. Fit the cover back onto the opening and replace the screws.