How do you measure for a replacement toilet seat?
Using a tape measure, determine the distance between the center of the mounting holes in the back of the toilet. The standard measurement for this distance is 5 ½”, with a midpoint of approximately 2 ¾”. Place the hook of your tape measure at the midpoint and measure to the outside edge of the toilet bowl rim in front.
Do you measure a toilet seat for replacement?
Before buying a new one, use a tape measure to determine what size toilet seat will fit the bowl. … Measure the length of the bowl from between the seat bolts to the outer edge of the front of the bowl. Round bowls should have a length of about 16 1/2 inches and elongated bowls should be 18 to 18 1/2 inches.
Does it matter what size toilet seat to buy?
The simple answer to the question “Are toilet seats a standard size?” is no. Unfortunately, toilet seats aren’t produced in a standard size, however, that doesn’t mean you can’t easily find a replacement for your own toilet.
Do all toilet seats fit the same?
No, there isn’t a standard size for all toilet seats, due to a variety of toilet styles. … There are key measurements that you will need, even though most seats are adjustable to fit the most common toilet bowl shapes. The measurements are: The distance between the fixing holes – where the screws are.
Are there different size toilet seats?
Toilet seats don’t come in sizes, but they do come in two different shapes: round toilet seats and elongated toilet seats, each of which correspond to two different toilet bowl shapes. … Elongated toilet seats are becoming more popular, and they have a long oval shape.
How do I know what size toilet I need?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
How do I know what toilet seat I have?
Carefully remove the toilet tank lid and set it gently on the floor, with the bottom facing up. Look for the manufacturer name or a number on the bottom side of the water tank lid.
What are common toilet seat sizes?
Typical width: 14″ – 14-1/2″Typical round length: 16″ – 17″ Typical elongated/extended length: 18″ – 19″
What size are toilet seat bolts?
The bolts have a 7/16-inch diameter that fits most standard toilet seats.
Are all toilet seats a standard size UK?
There is no universal standard for toilet or toilet seat sizes in the UK. However, certain patterns have developed. The following combinations of toilet seat lengths and widths are relatively popular: width 35 cm, length 40-41 cm.
How do you replace a concealed toilet seat?
Are all toilet seat bolts the same size?
Your seat post holes should measure 5.5 inches, and, if they do, all standard toilet seats will fit your seat post holes regardless of shape.
Are all toilet bolts the same size?
There are three possible measurement distances you can get from the wall to the toilet bolt: 10 inches, 12 inches, or 14 inches. The most common is 12 inches. In plumbing terminology, this is called a 12-inch rough. Sometimes these measurements are not exact.
Why is my toilet seat always loose?
Toilet seats often wobble because the holes in the toilet-bowl rim are larger than the diameter of the bolts, allowing movement that eventually makes the nuts loose. Tightening the nuts seldom works very well. … Another approach is to install self-adhesive rubber washers between the lid and top of the toilet bowl.
How do you measure toilet bolt spread?
Find the length between the 2 bolt holes. Hold the measuring tape in line with the centers of the bolt holes. Measure the distance between the bolt holes’ centers as accurately as possible. The bolt spread is the most important measurement, especially if you’re buying a specialty seat.
How do I know if my toilet seat is round or elongated?
Toilet seats are sold by shape (not by length).
If the length is between 18-19.5 inches, you have an elongated toilet bowl seat. If the length is between 17-17.75 inches, you have a round toilet bowl seat.
How do you measure the width of a toilet seat hinge?
How do you measure a toilet seat lid?
How far apart are toilet flange bolts?
Standard Fixtures Bolt holes must be between 5-1/4” and 8” apart. You will also need at least 3/4” clearance from the center of the bolt holes to the back of the toilet tank.
How do you measure a B&Q toilet seat?
Measure from your toilet seat fixing point to the lip and then the width to find the dimensions needed for your new toilet seat.
Can I put an elongated toilet seat on a round toilet?
An elongated toilet seat will technically fit on a round toilet, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat.