How to install porcelain tile

Difficult to install:

Since porcelain tile is denser, it’s more difficult to work with as well. The things that make it so long-lasting and reliable, also make it harder to cut through and layout properly.

Start by measuring the floor, then snap a chalk line down the middle of the floor’s longest dimension (Image 1). Mark a second line across the middle of the floor’s shortest dimension (Image 2). By dividing the room into quadrants, you can begin tiling from the center point using your lines as a guide.

Getting Started

It’s always advisable to start tiling your grid in the centre of the wall, as it’s easier to make sure your pattern is symmetrical. It also means any half-tiles you may need can go at the end of each row and will be of matching size.

You should tile the floor the opposite direction of the rectangle tiles. You don’t want rectangle tiles in rectangle direction in a rectangle room. It will look like a narrow hallway. Laying the tiles the opposite way will balance out the size of the room.

Lay bathroom wall tiles vertically when you want your room to look taller. If you have a low ceiling but a wider floor space, you may like to choose this option to open up your space vertically. Use large format tiles instead of many small tiles, as having many grout joints can make the space feel more cramped.

Direction of Tile

If a room is narrow, this further elongates the space, making it appear in longer and narrower than it is. This problem can be solved by installing the tiles on the diagonal. This draws the eye out to the corners of the room, which visually widens the space.