How do you start shingling with architectural shingles?
Lay one row of shingles, starting from the lower left corner of the roof. This row should project half an inch (1.27 centimeters) over the eaves. Nail down the shingles as you go along. Lay the next row of shingles, directly on top of the first row, making the row two tiles thick.
Do you have to stagger architectural shingles?
The trimmed shingle ensures the seams are staggered between courses. Install StormMaster Shake Shingles with 5-5/8” exposure. It’s also a good idea to apply the starter strip along the rake. The trick to laying asphalt shingles is to stagger the seams between courses.
Are architectural shingles easier to install?
Since an architectural shingle roof is easier to install, is more durable and comes with a better warranty, its lifespan cost is, in many instances, actually less than that of a more basic 3-tab roof.
Where do nails go in architectural shingles?
How many nails do you put in an architectural shingle?
Most shingle manufacturers recommend at least four nails per shingle and six in high wind areas such as Florida and Oklahoma.
How many nails do you put in a 3 tab shingle?
NAILING: Use galvanized (zinc coated) roofing nails, 11 or 12 gauge, with at least 3/8″ diameter heads, long enough to penetrate through plywood or 3/4″ into boards. Use 4 nails per shingle placed 6-1/8″ above the butt edge, 1″ and 13″ in from each end and 1/2″ above each cutout.