How to install a fireplace blower

Can you add a blower to an existing fireplace?

Can You Add a Fireplace Blower to an Existing Fireplace? Yes, you can add a fan/blower to most gas and wood fireplaces, inserts, and stoves. You will need to find a fireplace rated fan that will fit your fireplace and follow all instructions for installation in the unit’s manual.

How much does it cost to install a fireplace blower?

How much does it cost to put a blower in a gas fireplace? It costs about $100 to install a blower and fan in a gas fireplace. That’s in addition to the regular cost of installation.

Can you add a blower to a vented gas fireplace?

The answer is, yes — there are many gas fireplace models that have louvers (grilles) on the front where a blower kit can be easily installed. Blower kits are accessories that can enhance both the efficiency and the coziness of your vent-free fireplace.

Is a fireplace blower worth it?

Without a fan, you will get radiant heat from the front, both sides, the top and even the back of your stove. But by adding a fan to your appliance, you will enjoy convective heat in addition to the radiant heat. Most blower fans on fireplaces and stoves will move air in the range of 75 – 250 cubic feet per minute.

How do I get more heat from my fireplace?

5 Tips to Getting More Warmth Out of Your Fireplace
  1. Do a damper check. If you think about it logically, the chimney allows airflow so that smoke can escape when you light a fire, but when not in use, you’re letting the warm air from your home out.
  2. Caulk it.
  3. Keep heat in.
  4. Install a heat exchanger.
  5. Seal it.

How long does it take for a fireplace blower to turn on?

How Long Does It Take For A Fireplace Blower To Turn On And Off? It takes a fireplace blower about 10-20 minutes to complete the process of it turning on and off.

How do you test a fireplace blower?

Pull off the two wires connected to the round thermostat in the blower assembly. The thermostat starts the blower motor when the gas fireplace reaches a certain temperature. Touch the multimeter probes to the thermostat contacts. A zero or infinite test with the meter means the thermostat is defective.

Why is the blower on my fireplace not working?

If you notice that you’re blower is not putting out as much hot air as usual, then your blower may have a problem with decreased air flow. This decrease in flow occurs because of the build up of dust and other particles which block off the vent. To remove the debris, use a wet/dry vacuum and thoroughly clean the vent.

How do I make my fireplace blower quieter?

They also have a fan speed adjustment switch so you can strike a balance between blower speed and noise level. But if the fan gets loaded with dust or the motor bearings wear, the blower will make a rumbling noise at all speeds. Sometimes it’s possible to remove the blower and clean the fan blades to quiet it.

What is the quietest fireplace blower?

Quick Preview of the Quietest Fireplace Blower Picks
  • AIRBLAZE T12 Universal Fireplace Blower Fan Kit.
  • GFK-160A-GFK-160 Fireplace Blower Kit.
  • Tjernlund Quiet Fireplace Blower Fan Gas Insert.
  • Mr.KAN GFK-160 Fireplace Blower Fan Kit.
  • VICOOL GFK-160 GFK-160A Replacement Stove Fireplace Blower Fan Kit.

What is the best fireplace blower?

Here are some of the best fireplace blowers:
  • VICOOL Speed Variable S31105 – Top Pick.
  • Tjernlund 950-3307 Universal – Runner Up.
  • FireplaceBlowersOnline GFK-160 – Premium.
  • AIRBLAZE T12.
  • Rotom Fireplace Blower Fan 100CFM.

How can I make my fan blower quieter?

High static pressure makes airflow more audible
  1. Adjust the fan speed. Your blower or furnace fan should be set to deliver the proper airflow per ton.
  2. Add ductwork.
  3. Add a bypass duct.
  4. Add or expand grilles and registers.
  5. Replace existing registers and grilles with high velocity models.

What is a duct silencer?

Silencers or Air Duct Silencers are an engineered product specifically designed to control airborne noise in ducts, openings in buildings, enclosures, or from equipment. They may also be referred to as industrial sound attenuators.

How do you fix a noisy furnace blower?

If you hear this noise, turn off your furnace immediately to prevent any further damage to the furnace and call a professional for furnace repair. A few blower wheel problems include: Blower wheel is loose from the motor wheel. Get a professional to tighten the wheel.

How do I make my return vent quieter?

A List of Ways on How to Reduce Noise from Return Air
  1. Open the Vents.
  2. Clean the air ducts/ filters.
  3. Resolve Ductwork Issues.
  4. Get the Right Grills and Vents.
  5. Reduce the Static Pressure.
  6. Upgrade and get a variable speed blower.
  7. Resolve the central return problem.

Why is my return air vent so loud?

All air vents, meaning supply registers, ceiling diffusers, floor vents, and return grilles make some noise when the system fan is running. This is normal. Some systems are louder than others. The system needs to pull more air so the pressure and velocity increases, thus increasing the sound level.

What happens if there is not enough return air?

If there is not enough return air available, your HVAC system will not heat or cool properly. If not enough air is brought back, your HVAC system will not be able to keep up with temperature demands. In some cases, two returns may be necessary to provide enough return air.

Why is my new HVAC so loud?

This can be caused by a lack of return air, which can occur because too many vents are closed off, or furniture is obstructing airflow. It’s also possible a more significant issue exists—undersized or improperly installed ductwork.
You May Also Like