How to clean travertine floors

If it is time to disinfect the floor, add a tablespoon of mild, non-acidic dish soap to a gallon of water. Damp-mop the floor with this solution. Mop a second time with clean water to remove any lingering residue that may exist. Toweling the surface dry is also recommended.

To effectively disinfect travertine floors, you can use mild, non-acidic dish soap. Add only about a tablespoon to a gallon of warm water and mop the floor following the above steps. However, because you’re using soap, a residue or film is likely to occur. Rinse the floor thoroughly with clean water to prevent this.

A “Swiffer” type dry mop is fine, but stay away from the “wet” attachments, as the chemicals in them can damage natural stone.

Can I Use A Steam Mop To Clean Travertine? Yes, you can use a steam mop for this flooring type, as long as you follow the instructions included in the mop packaging and don’t steam too often. Before steaming your floors, make sure that you clean them with a broom to remove large particles, dust, dirt, and debris.

​Simply using a good mop that is damp with water will give your floors a nice, safe shine. If you have any issues with a stain or sticky residue on your travertine surfaces, you can use a mild dish soap such as Dawn to help clean your travertine floor.

Combine equal parts water and baking soda with just a splash of your regular cleaning agent. Mix until pasty and scrub into the travertine tile or paver you’d like to clean. Then, cover the surface area of the stain with a thick coating of the mix and allow it to sit for 15 to 30 minutes.

Cleaning Mold & Mildew

To eliminate off mold and mildew and keep your investment looking its best, travertine can be cleaned with a peroxide-based product like Oxiclean, which will not harm the polish on your travertine. Remember, hydrogen peroxide can bleach fabric, so, like bleach, watch your clothes and linens.

Never use vinegar on travertine tiles as it is and acid and will cause damage to the surface of the tile and will make them susceptible to stains and prematurely age the travertine floors and tiles.

Simple Green Granite & Stone Polish is safe for use on granite, marble, travertine, limestone, porcelain, ceramic, quartz, Corian^®*, Silestone^®*, and other natural and engineered stone surfaces.

Cleaning Travertine Surfaces

Dust mopping floors with a dry, clean, non-treated mop is recommended for regular use. If something more is needed, mix: 1 gallon warm water. 1 tablespoon Murphy’s Original Oil Soap.

Using Pine Sol on Travertine Floors: Pine–Sol should NEVER be used on natural stone. The acidic compound of Pine–Sol will eventually dull and etch the stone. If used often enough and long enough it could permanently damage the travertine stone not to mention the sanded grout.

Travertine is a natural stone, and in my mind that can’t be beat. While it certainly can look outdated when paired with certain materials (think red toned cabinets, old-world materials) it can also add aged character when paired with more current, or even classic looks.

A Multipurpose Stone Cleaner

Bar Keepers Friend Granite & Stone Cleaner & Polish isn’t just for granite, marble or quartz countertops. You can use it on bathroom vanities, sealed stone tile and backsplashes, polished stone mantels and fireplace surrounds, and on sealed stone lawn ornaments.

To whitewash travertine tile, create a white paint and water ratio of 1:1 and paint it on each tile. Move slowly across the tiles to get an even coat. When remixing, make sure that you keep the same ratio so that the whitewash is evenly distributed.

You should never use harsh cleaners like bleach or ammonia on travertine floors. These harsh chemicals can damage and dull the surface of your travertine floors, aging them well before their time. Do not use vinegar or citrus to clean travertine floors.