How to clean silver chain

Vinegar, water and baking soda together are a great option for many things including your tarnished silver. To use this method you just need to mix 1/2 cup of white vinegar with 2 tablespoons of baking soda in a bowl of lukewarm water. Let the silver soak for two to three hours.

Simply combine equal parts of white vinegar with water in a bowl and mix it together. Soak a soft toothbrush in the solution and gently brush the tarnished areas of your silver jewellery.

White vinegar and baking soda: Use this gentle cleaner to remove heavy tarnish that’s preventing you from polishing your silver. Soak the tarnished piece in a solution of 1/2 cup white vinegar and 2 tbsp. baking soda (be prepared for the fizzing!) for two to three hours, then rinse and dry.

Although using baking soda and aluminum foil can quickly remove tarnish from silverware, some dealers caution against using it on antique silver, as it can be too abrasive and ruin the finish (especially if you’re unsure of the provenance and it’s possible that the pieces are not actually sterling silver).

Use non-gel and non-abrasive toothpaste.

Rub onto the jewellery or silverware with circular motions to polish it and clean off the tarnish. Leave it for 5 minutes and then rinse off the toothpaste with water. After this procedure the silver is clean and shiny as new.

Understand that while toothpaste is great for cleaning silver jewelry, it can damage silver as well. Toothpaste contains abrasive particles that can polish off tarnish. The best way to clean these delicate items is to buff them with a silver polishing cloth.

If you don’t have any chemical cleaner, you can use Coca-Cola, or Coke, as a simple cleaning substitute for sterling or plated silver. The acid in Coke works to cut through any grime or rust on the silver’s surface. Once you soak the silver in cola, you can have a piece that looks good and new!

Quickly restore your jewelry or tableware with vinegar, water and baking soda. This cleaning agent is a great option for many things including your tarnished silver. Mix 1/2 cup of white vinegar with 2 tablespoons of baking soda in a bowl of lukewarm water. Let the silver soak for two to three hours.

Like lemon juice, vinegar is acidic, which results in a chemical reaction when it contacts tarnished silver. It makes the solution ideal for use as a silver cleaner. And, combining white vinegar with other common ingredients only increases its cleaning power.

You just need to pour ketchup into a plate and place the silver in it until its fully submerged. The silver can then rest in it for 10 minutes. You can then remove and rinse the silverware with warm water and pat dry it with a rag. This is undoubtedly one of the most unusual methods to clean silver.

White Vinegar & Baking Soda

Soak your tarnished jewelry in a ½ cup of white vinegar with 2 tablespoons of baking soda. Warning: this mixture fizzes. Keep your sterling silver in this solution for two to three hours, rinse and dry.

Use the multipurpose WD-40

Spray it on the silver jewelry and use a clean microfiber cloth to polish it in a circular motion. You will slowly see the tarnish disappear. WD-40 is an excellent cleaning agent that you can use to clean and shine your jewelry and several other items.

Heavy Cleaning

Using the same mild detergent solution and a silver cleaning cloth or light bristle brush, work over your piece slowly and carefully. For heavier cleanings, you can also clean your silver with a solution of baking soda, salt, vinegar, and boiling water.

For silver that is dull, filmy, or not yet discolored, mix a few drops of mild dish soap with warm water and dip in a soft cloth. Rub the jewelry, then rinse in cool water and buff with a cloth until dry. For silver that is heavily tarnished, mix a paste of three parts baking soda to one part water.

Fill a bowl with ½ cup of ammonia and 1 cup of warm water, and then drop your silver in. Leaving the silver to soak for ten minutes will dissolve the grime and exposure that tarnishes your silver. Remove from the solution, rinse with clean warm water, and dry off and polish with a polishing rag.

Rub baking soda onto the high points of the silver.

If you want your piece to look natural, remove the finish from the high spots. Rub a small amount of baking soda onto the raised areas of your piece to restore the polish to those areas.