How much does gravel cost per yard

Understanding Size and Coverage

Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

1 cubic yard of gravel weight is 2800 lb, in United States, 1 ton of gravel is equal to 2000 pounds, convert tons of gravel to cubic yards = 2000/2800 = 0.714 cubic yards, so there are 0.714 cubic yards in a ton of gravel.

A commonly used gravel size for driveway base layers is #3 gravel. This rock is generally 1-2 inches in diameter and does double duty by establishing a solid, reliable foundation and providing adequate drainage; both critical factors in driveway construction.

Full-size Pickup Trucks: Can usually handle 2 cubic yards of soil, 2-3 cubic yards of mulch, and 1 cubic yard of stone or gravel. Small Pickups and Trailers: Can usually handle 1 cubic yard of soil to maybe 1½ of mulch.

Crush and run is one of the cheapest materials that can be used in a gravel driveway at about $0.40 per square foot. Cost per cubic yard is about $20 and per ton about $28.

Pea Gravel

Pea gravel is popular gravel for driveway aesthetics. It’s made up of round, small stones that can come in many different colors. This type of gravel will easily migrate and spread under the weight of vehicles, though, and needs to be stabilized for long-term, maintenance-free usage.

The silt will loosen the gravel pieces, they will lose their friction and start to weaken and separate. Under these conditions your gravel will be a total and complete mess. To prevent this from happening, place a layer of Geotextile fabric between your subsoil and the bottom layer of gravel.

Base Gravel #3

Also called “clean stone,” this base gravel is made from machine-crushed stone and is composed of irregular rock fragments. A four-inch-thick layer of this type of gravel forms a strong foundation for the driveway while ensuring proper drainage.

This primarily 1″ crushed, washed gravel with a top size of 1-1/2″ is often used for drainage around perforated pipe, under concrete slabs, and as a coarse driveway topping for soft, very muddy driveways.

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

#73 Crushed Limestone has 3/4″ material down to dust, making it great for compaction. It is widely used for driveways and as a sub base for concrete slabs, flagstone, paver patios or asphalt.

The smallest of all gravel sizes is usually size #10, which is also commonly known as screenings gravel. This gravel is typically around 1/8th of an inch (0.32 centimeters) in diameter, making it similar in appearance to coarse sand.

#6 Stone is often referred to as small river rock. It is made out of local round fieldstone that has been graded from 1/2″ to 3/4″. It can be used for decorative or drainage purposes.

Crushed stone #5 includes stone that is 1 inch or smaller in size. This material is perfect for road and paver base.

67 stone is a limestone aggregate averaging 1/2″ in size. Our 67 stone is graded and has no fines and very little stone dust, meaning it will have minimal compaction. Description: A 1/2” crushed limestone aggregate.

Fines are any bits of rock smaller than the size indicated. So for 3/4-inch rock, for instance, fines would mean anything less than 3/4 inch all the way down to dust. Grades of material. These are the grades you’ll typically see: Minus: This grade can contain up to 80% fines.

AASHTO #1 Stone Size

Aashto #1 has a top rock size of 2 to 4-inches. While it is too bulky to be effectively used for surfacing, this grade of crushed stone is an excellent material for subgrade stabilization. AASHTO #1 is the largest crushed stone variety offered by Union Quarries.