How do you light the pilot on a Coleman mobile home furnace?
Where is the reset button on my Coleman furnace?
- Turn the Coleman furnace system switch to the “Off” position on the electric service panel.
- Locate the manual reset switch near the left side of your furnace blower. …
- Press the reset button, which you will find in the middle of the limit switch. …
- Turn the system switch to the “On” position.
How do you light a pilot light on a furnace?
How do you light a push button furnace?
Relight a Pilot Light
- Open the gas valve on the supply line and turn the gas control knob to PILOT.
- Push in the knob and hold it in. …
- Push the ignite button repeatedly if the furnace has one. …
- Keep pushing in the control knob for about 20 seconds after the pilot lights. …
- Release the knob and make sure the flame stays on.
How do I reset my Coleman thermostat?
To reset the thermostat model 9630-3361, put the thermostat in the off position , pull fuse wait 5 minutes , put the fuse back in wait another 5 minutes , then turn on.
Why is my Coleman furnace not working?
Most likely, either the electrical system providing your furnace’s power has shorted or the power switch has blown. Try resetting your furnace’s circuit breaker. If it has blown, you will need to replace it. … Your thermostat might be adjusting incorrectly, causing the furnace to cycle on and off too often.
Where is my furnace pilot light?
Near the bottom of your furnace is a switch that normally says “Pilot,” “On” and “Off.” Find this switch and turn it to the “Off” position. Wait at least five minutes. This is important because it gives the gas time to dissipate, which is necessary to avoid possibly starting a fire.
Where is the ignitor on my furnace?
Unscrew and remove the service panel on the side of the furnace and find the ignitor. It is usually mounted on a V-shaped bracket near the gas port. The ignitor has two wires attached to the back of it and has a flat metal tip.
Why is my pilot light not staying lit on my furnace?
Some common causes include issues with the thermocouple and pilot tube. The thermocouple detects the pilot light via sensors. … A dirty pilot tube can also prevent the pilot from staying lit. If the pilot tube is dirty, let the furnace cool down and turn off the gas.
What does pilot light look like?
If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame. If you don’t see a flame, your pilot light is out. If there is a flame, check the color. Pilot lights should always be blue.
How do you turn on a pilot light?
Turn the gas regulator valve to the “pilot” position. If the water heater has a manual “ignite” button, press that to light the pilot. If it doesn’t have the button, or the button fails, press the regulator valve and hold a grill lighter or long match to the pilot light valve until the pilot ignites.
How do I turn on the furnace heater?
Can I relight the pilot light by myself?
If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.
How do you light a heater pilot?
What happens when a pilot light goes out?
When your gas furnace decides to kick off at random on the coldest night of the year, your first response is always to get help and get it fast! Most people call someone right off the bat, whether it’s a family member or a contractor. No matter who you call, they will ask you the same thing: Is the pilot light out?